Tuesday, March 29, 2011

We came across an astounding development made by our Bharteya(Indian) Students at Inter-University Accelerator Centre, New Delhi. This project is call the ExpEYES and is targeted to help students in universities and school to perform Science Experiments, Projects and Demonstration of concepts. The design is a combination of the Hardware & Software Framework combined to enable real time measurements and analyze data.
Source: http://expeyes.in/design-of-expeyes  
The best part of all this is its completely Open Source, including the Hardware. The software part is mostly made up in Python. And the entire development was performed in Linux. The hardware is interfaced via USB
and capable of operating as signal generator, frequency counter and low frequency oscilloscope. This also includes the internally generated references and +5V outputs to help interface the external peripherals.
Source: http://expeyes.in/  
There is well documented User Manual available for the Hardware as well as a set of 50 Experiments that can be performed on the ExpEYES.
The Software package need for this hardware is already available in Debian Package form as well as for other linux in a Tgz archive. Apart from the software packages included there are few generic Python libraries that might me needed to make this working, here is a list:
PyGrace - http://pygrace.sourceforge.net/
PySerial - http://pyserial.sourceforge.net/
The Graphing Front end used is Grace:
http://plasma-gate.weizmann.ac.il/Grace/

Picture of the Software Front end graphing the LCR Measurement
The Python Library needed to make the ExpEYES hardware interface is also available. The Firmware loaded on to the ATmega32 chip that the hardware uses as a core is available with Bootloader (as part of Another Project called MicroHOPE).

We congratulate the Innovators of the ExpEYES: Ajith Kumar, V V V Satyanarayana, Jimson Sacharias, Deepak Munda, S. Venkataramanan for their visionary creation. 

We are also thankful to PHOENIX Project
Inter-University Accelerator Centre, New Delhi for promoting Open Source in education and research in Bharat(India).

Leave a Reply

Subscribe to Posts | Subscribe to Comments

Welcome to Boseji's Blog

Popular Post

Blogger templates

Welcome

Creation by Electronics Hobbyists from Bharat(India) to encourage & help people. This blog hosts the numerous innovations, discoveries and projects we provide.
Our Research Wing Adhar Labs
Contact Form | Email Address
We Support Open Source Hardware Definition v1.0
Creative Commons License
All works on this blog are licensed under a
Creative Commons Attribution-ShareAlike 3.0 Unported License.
Based on a work at forbharat.wordpress.com and m8051.blogspot.com.

Permissions beyond the scope of this license may be available at http://forbharat.wordpress.com/permissions/.
Thank you for all your support.

© A.D.H.A.R Labs Research 2008-2013 . Powered by Blogger.

Follow by Email

Followers

PCB Unit Converter

mils
mm

- Copyright © Electronics for Bharat -Robotic Notes- Powered by Blogger - Designed by Johanes Djogan -