Archive for June 2010

Now Nokia 3310 LCD is working with multi-line display. Need to work on the Fonts side since they are too small. At least an 8x8 font is needed to have better user experience. Also working towards converting the conventional Reg arable battery to Lithium Ion based battery. Submission date for the LPC1100 Design Challenge - Hardware Phase was yesterday. I have managed to submit the entry with all the pre-requisites. keeping the fingers crossed for the next phase ;-).
LaunchPad development kit is a part of the TI's MSP430 Value Line series. LaunchPad has an integrated DIP target socket that supports up to 20 pins, allowing MSP430 Value Line devices to be dropped into the LaunchPad board. Also, an on-board flash emulation tool allows direct interface to a PC for easy programming, debugging, and evaluation. Included are free and down-loadable software development environments (CCS as well as IAR support this board) for writing and debugging software. LaunchPad can be used to create interactive solutions thanks to its on-board pushbuttons, LEDs, and extra input/output pins for easy integration of external devices.

Here is Picture of the same:

I am trying hard to get hold on one of these boards. Since MSP430 is a crazy low power chip and at this low cost its a must have.

If you wish to procure this boards here are some quick links:

If you are in Bharat(India) then you can buy it from Element14 Via "Kits & Spare".
Here is a link:


Digikey: 296-27570-ND
Mouser: 595-MSP-EXP430G2

Here are some further links that can be helpful:

Yeterday I was looking out for a quick clean solution to removal of the .SVN directories from one of my projects. Its difficult to have the complete sub directories cleaned up.
Then I found an easy solution(for Windows):
1. Create a file named "cleanup.cmd" and type the below as it is :

for /f "tokens=* delims=" %%i in ('dir /s /b /a:d *svn') do ( rd /s /q "%%i" )

2. Now place this file in the directory you want to clean.
3. Double Click and you are done.
[The Original Source]
In case of Linux its a bit easy. In command line just type the following:
find . -type d -name ‘.svn' -print0 | xargs -0 rm -rdf
Listed are some of the shops that I am acquainted with

Tenet Technetronics
Most of the ARM based kits and wireless stuff as well as kits/parts from Sparkfun , Embest and ThaiEasyElec
An oldie in this business, all 'Electronics For You' Magazine projects and Now they stock from Farnell also
Costly but sells good collection of items
Lots of Ready made robotics platforms as well as accesorries
Robotic Accessories, Batteries (Li-on) and dev-kits. Reasonable price for had to find accessories.
NSK Electronics
Specializes in Dev-kits, GSM-GPRS, ARM, CPLD, Thermal Printer, PLC etc.

Little costly but have wide variety
Mostly well known for SBC and ARM based kits, USB Oscilloscope.
All types of things starting from Arduinos to SBCs. Complete Touch Screen SBCs also Available.
4D Systems
Graphics and Multimedia oriented company selling both Propitiatory chips as well as kits for storage as well as LCD, OLED, Touch Screen Displays and TFT Displays.
TechToys Hong kong
LCD and Graphics controllers + some rare parts
Premium supplier of Dev-Kits for many microcontroller platforms.
Now EEPROM 24LC16 I2C driver is working. Also the UART has come alive with both receive and transmit working. The PSU now uses a TPS7333 a nice 3.3V regulator from TI. Need to check out the display now.
Today the Serial port code is working with both receive as well as Transmit happening properly. I have fixed the keypad on the base board. Here is a picture of the setup.
Next I need to connect the display. Also the charger and regulator needs to be assembled.
I was looking around for some easy to implement CMS(Content Management Systems) for my Friend. Well out of all the big CMS like Joomla, Drupal, etc my friend wanted some thing radically simple without the Database stuff. So I found him some and here is the List of all that we were able to gather:
Now lets see, I found a very good Javascript Based WYSIWYG editor that is embeddable in any website.
TinyMCE This is an very easy to use editor much like Google wave. Both the above implementations use this editor by default.
Welcome to Boseji's Blog

Popular Post

Blogger templates


Creation by Electronics Hobbyists from Bharat(India) to encourage & help people. This blog hosts the numerous innovations, discoveries and projects we provide.
Our Research Wing Adhar Labs
Contact Form | Email Address
We Support Open Source Hardware Definition v1.0
Creative Commons License
All works on this blog are licensed under a
Creative Commons Attribution-ShareAlike 3.0 Unported License.
Based on a work at and

Permissions beyond the scope of this license may be available at
Thank you for all your support.

© A.D.H.A.R Labs Research 2008-2013 . Powered by Blogger.

Follow by Email


PCB Unit Converter


- Copyright © Electronics for Bharat -Robotic Notes- Powered by Blogger - Designed by Johanes Djogan -